13FLP Series Linear Potentiometer

Conductive Plastic Model with front and rear extended shaft

About the 13FLP Series Linear Potentiometer

The 13FLP is a low-cost item with side turret terminals and a thread at the end of the shaft.

Features 13FLP

  • Miniature conductive plastic model
  • Measurement range: between 12mm and 100mm
  • Resistance value: between 500 to 20kO
  • Linearity tolerance: ±2%, ±1.5%, ±1%, ±0.7%, ±0.5% or ±0.3%
  • Body dimensions (mm): 11x13x(depends on the type of linear potentiometer)

In the 13FLPA series we have the 13FLP12A, 13FLP25A, 13FLP50A and 13FLP100A available.
For more specifications on one of these types, you can contact us.

Special Specifications Available

Spring return device mounted on the shaft (friction is referred as within table), special machining on the shaft, wirewound resistive element type (13LP series). In case of 13FLP series with spring return device, please note the following: The spring return device is mounted on the outside shaft, of which dimensions are as the table.

Specifications

Standard resistance values
500Ω, 1k, 2kΩ, 5kΩ, 10kΩ, 20kΩ
Total resistance tolerance
±20%
Independent linearity tolerance
Standard class: ±2.0%, ±1.5%, ±1.0%, ±0.7%
Precision class: ±1.0%, ±0.7%, ±0.5%, ±0.3%
Resolution
Essentially infinite
Output smoothness
Within 0.1% against input voltage
Contact resistance variation
Within 2% C.R.V.
Power rating
0.2W, 0.4W, 0.7W, 1.2W
Electrical stroke
12.7±0.5mm, 25.4±0.5mm, 50.8±0.5mm, 101.6±0.5mm
Insulation resistance
Over 1.000MΩ at 500VDC
Dielectric strength
1 minute at 500V.A.C.
Friction
Within 0.5N(50gf), Within 1.0N (100gf)
Stopper strength
±400p.p.m./°C
Mass
Approx. 10g, approx. 15g, approx. 25g, approx. 35g
  • Follow us: