22HP Multi-turn Potentiometer

Wirewound (Busingmount) Low-cost item - RoHS Compliant

About the 22HP Multi-turn Potentiometer

The 22HP is our lowest-cost multi-turn potentiometer with an outer diameter of 22mm. This potentiometer has an international patented snapping-in construction.

Features Multi-turn potentiometer 22HP-5

  • Wirewound
  • Dimensions (mm) DxL: 22×19
  • Standard resistance range (ohm): 100-50k
  • Independent linearity (±%): 0.3 to 0.2
  • Mechanical travel (+10° 0°): 1,800
  • Electrical travel (±5°): 1,800

Special Specifications Available

Shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), multi-ganged (available up to 10 gangs), with high torque, special shaft dia. (ø3mm, ø3.175mm, ø4mm, ø5mm), special machining on the shaft, with plastic shaft, metal bushing type (22HPM-n with anti-rotation pin), 1, 2, 3, 4, 6, 7 and 8-turn versions are available (these versions have the same outer dimensions, but general specifications are please request us for details), simple sealed housing, slippingclutch incorporated type (20mN·m~60mN·m), extra taps (available up to 1 tap only for 10-turn model), servomount type (same dimensions as 22HHPS-10).

Specifications

Shaft Dia. (mm)
6
Standard resistance range
100O to 50kO (5turn), 100O to 100kO (10turn)
Total resistance toleranc
Standard Class ±3%(H), Precision Class ±1%(F)
Independent linearity tolerance (5-turn 10-turn)
Standard Class: ±0.3% ±0.25%
Precision Class: ±0.2% ±0.1%
(within 5kO): (±0.25%) (±0.15%)
Power Rating
1.0W (5-turn), 2.0W (10-turn)
Noise
Within 100O E.N.R.
Electrical Travel
360º Xn ±5º (n: No. of turns)
Mechanical Travel
360º Xn (+10º n: No. of turns)
Insulation Resistance
Over 1,000MO at 500 V.D.C.
Dielectric Strength
1 minute at 1,000 V.A.C.
Starting Torque
Within 10mN·m (100gf ·cm)
Stopper Strength
Approx. 0.35N·m (3.5kgf·cm)
Max. torque exerted on fastening the mounting nut to the bushing
Within 1.0N·m (10kgf·cm) (in case of panel thickness with over 2.5mm, the rotating torque may become heavier)
Max. working voltage
250V
Resist. temp. coefficient of wire
±20p.p.m./ºC
Materials
Shaft: Stainless steel
Housing case: Glass-filled nylon
Bushing: Glass-filled nylon (for ganged version the bushing is metalbrass without plating)
Terminals: Gold-plated brass (all terminals can be Fitted with the AMP 110 series faston receptable (2.8x0.5mm) or equivalents
Mass
Approx. 20g (both 5-turn and 10-turn)
  • Follow us: