FCP22E Single-turn Potentiometer

Plastic Housing - Bushingmount - RoHS Compliant

About the FCP22E Single-turn Potentiometer

The FCP22E is a low-cost potentiometer with plastic housing, internationally patented snapping-in construction and side lug terminals.

Features FCP22E - Conductive plastic (Busingmount)

  • Conductive plastic
  • Dimensions D x L (mm): 22x12
  • Standard Resistance Range 1 to 10 kilo ohm
  • Independent Linearity (± %): 1.5 to 1.0
  • Mechanical travel (+10° 0°): 360°
  • Electrical travel (±5°): 320° ±5°

Special Specifications Available

Extra taps (available up to 1 tap). Rear shaft (6mm dia. and 20mm length), Multi-ganged (available up to 10 gangs), Stopper (rotating angle becomes 320º and stopper strength is 0.6N·m [6kgf·cm]), Special electrical travel, Inch dimensional shaft dia. (ø6.35mm) · Bushing with inch dimensions, Special machining on the shaft.

Specifications

Shaft diameter (mm)
6
Standard Resistance Values
1k, 2k, 5k, 10k (O)
Special Practical resistance Values
500, 20k, 50k, 100k (O)
Total resistance tolerance
Standard Class ±15% (L), Precision Class ±10% (K)
Independent linearity tolerance
Standard Class ±1.5%, Precision Class ±1.0%
Resolution
Essentially infinite
Output Smoothness
Within 0.1% against input voltage
Contact Resistance Variation
Within 2% C.R.V.
Power Rating
1.0.W
Electrical Travel
320º ±5º
Mechanical Travel
360º (Endless)
Insulation Resistance
Over 1,000MO at 500 V.D.C
Dielectric Strength
1 minute at 500 V.A.C.
Starting Torque
Within 5mN·m (50gf·cm)
Resistance temp. coefficient
±400p.p.m./ºC
Mass
Approx. 20g
  • Follow us: