CP22 Single-turn Potentiometer

RoHS Compliant - Wirewound (Servomount)

About the CP22 Single-turn Potentiometer

The CP22 is a servomount type potentiometer with ball bearings and a 22mm outer diameter and turret side terminals.

Features CP22 - Wirewound (Servomount)

  • Wirewound
  • Dimensions D x L (mm): 22.23x15
  • Standard Resistance Range 50 to 10 kilo ohm
  • Independent Linearity (± %): 0.5 to 0.2
  • Mechanical travel: 360°
  • Electrical travel: 355° ±5°

Special Specifications Available

Lower resistance values (10O, 20O), extra taps (available up to 2 taps), multiganged (available up to 5 gangs. Housing length is extended by 8.5mm per gang), shaft with front and rear extension (rear shaft with 3mm dia. And 10mm length), with stopper (rotating angle becomes 330º and stopper strength is 0.3N·m [3kgf·cm]), special electrical travel, shaft dia. (ø3.175mm) with inch dimensions, special machining on the shaft.

Specifications

Shaft diameter (mm)
3
Standard resistance range
50O to 10kO
Max. Practical resistance value
20kO
Total resistance tolerance
Standard Class ±3%(H) Precision Class ±1%(F)
Independent linearity tolerance
Standard Class ±0.5%, Precision Class ±0.2% (±0.3% in case of within 1kO)
Power Rating
0.5W
Noise
Within 100O E.N.R.
Electrical Travel
355º ±5º
Mechanical Travel
360º (Endless)
360º (Endless)
Over 1,000MO at 1,000 V.D.C
Dielectric Strength
1 minute at 1,000 V.A.C.
Starting Torque
Within 1.5mN·m (15gf·cm)
Resist. temp. coefficient of wire
±20p.p.m./ºC
Mass
Approx. 15g
  • Follow us: