CP45 Single-turn Potentiometer

1-turn Potentiometer Wirewound (Servomount) | RoHS Compliant

About the CP45 Single-turn Potentiometer

The CP45 is a servomount type potentiometer with ball bearings and a 41mm outer diameter and turret side terminals.

Features CP45 - Wirewound (Servomount)

  • Wirewound
  • Dimensions D x L (mm): 41x18
  • Standard Resistance Range 50 to 20 kilo ohm
  • Independent Linearity (± %): 0.5 to 0.1
  • Mechanical travel: 360°
  • Electrical travel: 355° ±3°

Special Specifications Available

Lower resistance values (10O, 20O), extra taps (available up to 5 taps), multiganged (available up to 7 gangs. Housing length is extended by 12mm per 1 gang), shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), bushingmount type, with stopper (rotating angle becomes 330º and stopper strength is 0.9N·m [9kgf·cm]), special electrical travel, shaft dia. (ø6.35mm) with inch dimensions, special machining on the shaft.

Specifications

Shaft diameter (mm)
6
Standard resistance range
50O to 20kO
Max. Practical resistance value
50kO
Total resistance tolerance
Standard Class ±3%(H), Precision Class ±1%(F)
Independent linearity tolerance
Standard Class ±0.5%, Precision Class ±0.1%
Power Rating
1.0W
Noise
Within 100O E.N.R.
Electrical Travel
355º ±3º
Mechanical Travel
360º (Endless)
Insulation Resistance
Over 1,000MO at 1,000 V.D.C
Dielectric Strength
1 minute at 1,000 V.A.C.
Starting Torque
Within 4mN·m (40gf·cm)
Resist. temp. coefficient of wire
±20p.p.m./ºC
±20p.p.m./ºC
Approx. 90g
  • Follow us: