46HD Multi-turn Potentiometer
Wirewound Potentiometer Bushingmount type (3-turn, 5-turn, 10-turn, 15-turn, 20-turn)
Eigenschaften
- Wirewound
- Dimensions (mm) DxL: 46×38.5
- Standard resistance range (ohm): 10Ω -20kΩ / 20Ω -50kΩ
- Independent linearity (±%): 0.4 to 0.2 /
- Mechanical travel (+10° 0°): 1,080 / 1,800
- Electrical travel (±5°): 1,080 / 1,800
About the 46HD Multi-turn Potentiometer
The 46HD is a precision multi-turn potentiometer with an outer diameter of 46mm. This model is highly reliable and has been manufactured over 50 years. It is also available with limit-switches incorporated.
Features Multi-turn potentiometer 46HD-3
- Wirewound
- Dimensions (mm) DxL: 46×38.5
- Standard resistance range (ohm): 10Ω -20kΩ
- Independent linearity (±%): 0.4 to 0.2
- Mechanical travel (+10° 0°): 1,080
- Electrical travel (±5°): 1,080
Features Multi-turn potentiometer 46HD-5
- Wirewound
- Dimensions (mm) DxL: 46×38.5
- Standard resistance range (ohm): 20Ω -50kΩ
- Independent linearity (±%): 0.4 to 0.2
- Mechanical travel (+10° 0°): 1,800
- Electrical travel (±5°): 1,800
Special Specifications Available
30-turn type (S46HD-30), multi-ganged (available up to 2 gangs), with limit-switches, shaft with front and rear extension (in case of bushing mount type, rear shaft with 6mm dia. and 28mm length together with the bushing of M9 X 10mm and in case of servomount type, rear shaft with 6mm dia. and 15mm length), shaft dia. (ø6.35mm) · bushing with inch dimensions, simple sealed housing, oil-filled type (OF46HD), special machining on the shaft.
Benötigen Sie diesen Sensor für Ihr nächstes Projekt?
Fordern Sie jetzt ein Angebot an oder lassen Sie sich kostenfrei von unseren Experten beraten!
Produkt Downloads
Maßgeschneidert nach Ihren Anforderungen
Nicht das richtige Produkt? Wir bieten Ihnen sowohl Standard Sensoren als auch maßgeschneiderte Produkte und komplette Messlösungen. Bitte kontaktieren Sie uns für eine Beratung oder ein unverbindliches Angebot!
KontaktTechnische Spezifikationen
Spezifikationen | Wert |
---|---|
(within 5kΩ): (±0.25%) (±0.15%) | |
Precision Class: ±0.2% ±0.1% | |
360º xn (+10º n: no. of turns) | Over 100 MΩ at 1,000 V.D.C. |
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 360º Xn ±5º (n: No. of turns) |
Independent linearity tolerance (5-turn 10-turn) | Standard Class: ±0.4% ±0.3% |
Mass | Approx. 90g (3,5-turn), Approx. 120g (10-turn), Approx. 150g (15-turn), Approx. 180g (20-turn) |
Max. practical resistance value | 50kΩ, 100kΩ (3turn), 100kΩ (5turn), 200kΩ (10,15turn),500kΩ (20turn) |
Max. working voltage | 900V |
Mechanical travel | 360º Xn (+10º n: No. of turns) |
Noise | Within 100Ω E.N.R. |
Power rating | 2.0W (3-turn) 2.5W (5-turn), 5.0W (10-turn), 7.5W (15-turn), 10.0W (20-turn) |
Resist. temp. coefficient of wire | ±20p.p.m./ºC |
Shaft dia. (mm) | 6 |
Standard resistance range | 10Ω to 20kΩ (3turn), 20Ω to 50kΩ (5turn), 50Ω to 100kΩ (10,15turn), 50Ω to 200kΩ (20turn) |
Starting torque | Within 20mN·m (200gf·cm) (Bushing mount type), Within 10mN·m (100gf·cm) (Servomount type) |
Stopper strength | Approx. 0.9N·m (9kgf·cm) |
Total resistance tolerance | Standard Class ±3%(H) [ ±5%(J) in case of within 1kΩ ], Precision Class ±1%(F) [ in the pot. with a single wire resistive element, the precision class should read ±2%(G) ] |