1. Althencontrols
  2. Joysticks-industriels-capteurs-de-potentiometrique
  3. Joysticks-industriels-capteurs-de-potentiometrique/capteurs-de-position-lineaires
  4. Joysticks-industriels-capteurs-de-potentiometrique/capteurs-de-position-lineaires/potentiometres-lineaires
  5. 8FLP Linear Potentiometer

8FLP Linear Potentiometer

Conductive Plastic Model with front and rear extended shaft


Caractéristiques principales

  • Miniature conductive plastic model
  • Measurement range: between 10 mm and 15 mm
  • Resistance value: 1 kΩ to 50 kΩ
  • Linearity tolerance: ±2% or ±1%
  • Body dimensions (mm): 8.2x7.3x(depends on the type of sensor)

About the 8FLP Linear Potentiometer

The 8FLP is a miniature sized and low-cost item with leadwire terminals, a front and rear extended shaft/circle holes and a 10mm stroke.

In the 8FLPA series we have the 8FLP10A and 8FLP15A available.

Special Specifications Available

Spring return device incorporated (friction is approx. 3N [300gf], special electrical stroke (8mm, 12mm), special machining on the shaft.

Special NOTE

When ordering special shaft length of our linear-motion potentiometer, especially models 30LP, 50LP, 8FLP and 15FLP series as standard version with front and rear shaft extension, please be sure to specify the shaft length exactly when the shaft is completely pressed into the housing.

Example: In case of model 8FLP10A standard version As you see from the above right drawing, please specify the exact Length of L1 and L2 when the shaft is completely pressed into the housing. In case of models with spring return device, the condition of spring returned is as right drawing and please specify the exact length of L1 and L2 when the shaft is completely pressed into the housing.

Do you need this sensor for your next project?

Request a quotation today or leave your details to recieve more information from one of our experts.

Parler à un expert

Have it your way

Not exactly what you’re looking for? We offer standard Linear Potentiometers, but can also help you with a tailor-made linear position sensor or a complete measuring solution. Please contact us for advice or budgetary pricing.

Parler à un expert

Spécifications techniques

Spécifications Valeur
Precision class ±1.0%
Precision class ±10%
Contact resistance variation Within 2% C.R.V.
Dielectric strength 1 minute at 500V.A.C.
Electrical stroke 11 ±0.5mm
Friction Within 0.3N (30gf)
Independent linearity tolerance Standard class ±2.0%
Insulation resistance Over 1.000MΩ at 500VDC
Mass Approx. 5g
Max. practical resistance tolerance 50kΩ
Mechanical stroke About 12mm
Output smoothness Within 0.1% against input voltage
Power rating 0.2W
Resistance temperature coefficient ±400p.p.m./°C
Resolution Essentially infinite
Standard resistance values 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ
Stopper strength Approx. 10N (1kgf)
Total resistance tolerance Standard class ±15%