OF20LP Series Linear Oil-filled Potentiometer
Wirewound potentiometer with front extended shaft and with connector
Caractéristiques principales
- Oil-filled wirewound model
- Measurement range: between 50 mm and 200 mm
- Resistance value: 100 Ω to 80 kΩ
- Linearity tolerance: ±0.7%, ±0.5% or ±0.4%
- Various body dimensions available
About the OF20LP Series Linear Oil-filled Potentiometer
The OF20LP is a long-life type potentiometer with a water-proof connector.
The OF20LP50, OF20LP100 and OF20LP200 are part of the OF20LP Series.
Body dimensions (mm): Ø20x(depends on the sensor type)
For specified technical data regarding a specific type from this serie, you can contact us.
Specifications of Connector
- Water-proof type
- Number of poles: 6 poles
- Electrical wire diameter
- To be connected: ø6.3mm max
Special Specifications Available
- Extra taps (available up to 1 tap)
- Special machining on the shaft
- Non-oil filled type.
Do you need this sensor for your next project?
Request a quotation today or leave your details to recieve more information from one of our experts.
Téléchargements de produits
Have it your way
Not exactly what you’re looking for? We offer standard Linear Potentiometers, but can also help you with a tailor-made linear position sensor or a complete measuring solution. Please contact us for advice or budgetary pricing.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Precision class: ±0.4%, ±0.25% | |
Precision class: ±3% | |
50mm, 100mm, 200mm | Over 100MΩ at 500V.D.C. |
Dielectric strength | 1 minute at 900V.A.C. |
Friction | Within 15N (1.5kgf) |
Independent linearity tolerance | Standard class: ±0.7%, ±0.5% |
Mass | Approx. 100g, approx. 150g, approx. 180g |
Max. practical resistance value | 20kΩ, 40kΩ, 80kΩ |
Noise | Within 100Ω E.N.R. |
Power rating | 0.75W, 1.0W, 2.0W |
Resistance temperature coefficient | ±20 p.p.m./°C |
Standard resistance range | 100Ω~10kΩ, 100Ω~20kΩ, 100Ω~50kΩ |
Stopper strength | Approx. 90N (9kgf) |
Stroke | 50mm, 100mm, 200mm |
Total resistance tolerance | Standard class: ±5% |