OFCP50 Oil-filled Potentiometer
Wirewound (Servomount) Potentiometer for R&D, industrial and maritime applications
Caractéristiques principales
- Dimensions (mm) DxL: 70×52
- Shaft Dia. (mm): 6
- Independent linearity (±%): 0.5 to 0.1
- Mechanical travel (+10° 0°): 360°
- Electrical travel (±5°): 355°±3°
About the OFCP50 Oil-filled Potentiometer
The OFCP50 is a long-life type with servomount and ball bearings. It is suitable for precision servo use. (endless)
Special specifications available
Lower resistance values (50Ω to 500Ω), extra taps (available up to 3 taps), stopper (rotating angle becomes 330º and the stopper strength is 0.9N·M [9kgf·cm]), special electrical travel, shaft dia. (ø 6.35mm) with inch dimensions, special machining on the shaft, rear shaft (6mm dia. and 20mm length).
Avez-vous besoin de ce produit pour votre prochain projet ?
Demandez un devis ou laissez vos coordonnées pour recevoir plus d'informations de la part d'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des produits standard, mais nous pouvons également vous aider à trouver une solution complète sur mesure. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 355º ±3º |
Independent linearity tolerance | Standard Class ±0.5%, Precision Class ±0.1% |
Insulation resistance | Over 100MΩ at 1,000 V.D.C. |
Mass | Approx. 500g |
Mechanical travel | 360º (Endless) |
Noise | Within 100Ω E.N.R. |
Power rating | 1.5W |
Resist. temp. coefficient of wire | ±20p.p.m./ºC |
Standard resistance range | 1kΩ to 50kΩ |
Starting torque | Within 30mN·m (300gf·cm) |
Total resistance tolerance | Standard Class ±3% (H), Precision Class ±1% (F) |