OF50 Oil-filled Potentiometer
Wirewound (Bushingmount) with excellent lifetime and high durability
Caractéristiques principales
- Dimensions (mm) DxL: 62×50
- Shaft Dia. (mm): 5
- Independent linearity (±%): 1.0 to 0.5
- Mechanical travel (+10° 0°): 300°±5°
- Electrical travel (±5°): 280°±5°
About the OF50 Oil-filled Potentiometer
The OF50 is a general purpose type potentiometer with a stopper and is suitable for high-voltage use.
Special specifications available
Extra taps (available up to 1 tap), multi-ganged (available up to 2 gangs), special electrical travel, shaft dia. (ø 6.35mm) · bushing with inch dimensions, special machining on the shaft, without stopper (electrical travel remains 280º ±5º, shaft with front and rear extension (rear shaft with 6mm dia. and 25mm length).
Avez-vous besoin de ce produit pour votre prochain projet ?
Demandez un devis ou laissez vos coordonnées pour recevoir plus d'informations de la part d'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des produits standard, mais nous pouvons également vous aider à trouver une solution complète sur mesure. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 280º ±5º |
Independent linearity tolerance | Standard Class ±1.0%, Precision Class ±0.5% |
Insulation resistance | Over 100MΩ at 1,000 V.D.C. |
Mass | Approx. 300g |
Max. practical resistance value | 50kΩ |
Mechanical travel | 300º ±5º |
Noise | Within 100Ω E.N.R. |
Power rating | 0.5W |
Resist. temp. coefficient of wire | ±20p.p.m./ºC |
Standard resistance range | 100Ω to 20kΩ |
Starting torque | Within 30mN·m (300gf·cm) |
Stopper strength | Approx. 0.9N·m (9kgf·cm) |
Total resistance tolerance | Standard Class ±10% (K), Precision Class ±5% (J) |