10HP Multi-turn Potentiometer
World's smallest 10-turn Potentiometer (5-turn and 10-turn)
Caractéristiques principales
- Wirewound
- Dimensions (mm) DxL: 10.5×19.2 / 10.5×25.5
- Resistance range (ohm): 100Ω -20kΩ / 100Ω -50kΩ
- Linearity (±%): 0.35 to 0.2 / 0.25 to 0.1
- Mechanical travel (+10° 0°): 1,800 +30° 0° /
3,600 +30° 0° - Electrical travel (±5°): 1,800 / 3,600
About the 10HP Multi-turn Potentiometer
The Multi-turn Potentiometer 10HP is world's smallest 10-turn potentiometer. The potentiometer is available in 5-turn models and 10-turn models.
Features Multi-turn potentiometer 10HP-5
- Wirewound
- Dimensions (mm) DxL: 10.5×19.2
- Standard resistance range (ohm): 100 Ω - 20 kΩ
- Independent linearity (±%): 0.35 to 0.2
- Mechanical travel (+10° 0°): 1,800 +30° 0°
- Electrical travel (±5°): 1,800
Features Multi-turn potentiometer 10HP-10
- Wirewound
- Dimensions (mm) DxL: 10.5×25.5
- Standard resistance range (ohm): 100 Ω - 50 kΩ
- Independent linearity (±%): 0.25 to 0.1
- Mechanical travel (+10° 0°): 3,600 +30° 0°
- Electrical travel (±5°): 3,600
Special Specifications Available
3turn type (S10HP3), lower resistance values (20Ω, 50Ω), shaft dia. (ø3.175mm) · bushing with inch dimensions, special machining on the shaft, shaft with front and rear extension (rear shaft with 0.8mm dia. and 10mm length).
Avez-vous besoin de ce produit pour votre prochain projet ?
Demandez un devis ou laissez vos coordonnées pour recevoir plus d'informations de la part d'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des produits standard, mais nous pouvons également vous aider à trouver une solution complète sur mesure. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
| Spécifications | Valeur |
|---|---|
| (within 5kΩ): (±0.25%) (±0.15%) | |
| Precision Class: ±0.2% ±0.1% | |
| Dielectric strength | 1 minute at 500 V.A.C. |
| Electrical travel | 360º Xn ±5º (n: No. of turns) |
| Independent linearity tolerance (5-turn 10-turn) | Standard Class: ±0.35% ±0.25% |
| Insulation resistance | Over 100 MΩ at 500 V.D.C |
| Mass | Approx. 17g (5-turn), Approx. 20g (10-turn) |
| Max. practical resistance value | 50kΩ (5turn), 100kΩ (10turn) |
| Max. torque exerted on fastening the mounting nut to the bushing | Within 1N·m (10kgf·cm) |
| Max. working voltage | 450 V |
| Mechanical travel | 360º Xn + 30º 0° (n: No. of turns) |
| Noise | Within 100O E.N.R. |
| Power rating | 0.5W (5-turn), 1.0W (10-turn) |
| Resist. temp. coefficient of wire | ±20p.p.m./ºC |
| Shaft dia. (mm) | 4 |
| Standard resistance range | 100Ω to 20kΩ (5turn), 100Ω to 20kΩ (10turn) |
| Starting torque | Within 3mN·m (30gf·cm) |
| Stopper strength | Approx. 0.1N·m (1kgf·cm) |
| Total resistance tolerance | Standard Class ±3%(H), Precision Class ±1%(F) |