H30JH Drie-assige Vinger Joystick

Low-cost 3-Assige Joystick Controller met hall effect IC type weerstandselement

H30JH Drie-assige Vinger Joystick | Althen Controls

About the H30JH 3-Axis Finger Joystick 

Low-cost 3-dimensional coordinate type joystick controller with an incorporated hall effect IC type resistive element. It offers long life expectancy and high reliability.

Features H30JH

  • 3-dimensional coordinate type
  • With a hall effect IC
  • Protection IP40/IP54

Applications for H30JH

  • Medical instruments
  • Security camera operations


Controlling range of operating lever
X and Y directions: Approx.±15º from center position.
Z direction: Approx. ±30º from center position.
Operating force
X and Y directions: Approx.1.5~3N (150~300gf)
Z direction: Approx. 10~30mN•m (100~300gf.cm)
Operating temperature range
10~55Hz 98m/s²
Life expectancy
Approx. 1.000.000 operations
Approx. 50g
Hall effect IC type resistive element incorporated
Applied voltage: 5V±10%D.C.
Effective output: Approx. 0.5V~4.5V
Electrical rotating angle: X and Y-axis: Approx. ±15º Z-axis: Approx. ±30º
Independent linearity tolerance: ±3%
Load resistance: over 10KΩ
Dielectric strength
1 minute at 250VAC
Insulation resistance
Over 100MΩ at 250VDC
EMC durability
50V/m (80Mhz~1GHz 1KHz sine-wave 80%AM modulation)
  • Volg ons: