H40JH Drie-assige Vinger Joystick

Low-cost 3-assige joystick controller met een ingebouwd hall effect IC type weerstandselement.

H40JH Drie-assige Vinger Joystick | Althen Controls

About the H40JH 3-Axis Finger Joystick

Low cost version of 3-dimensional coordinate type joystick controller incorporated a hall effect IC type resistive element. It offers high-protection and several special outputs.

Features 40JH

  • Low-cost
  • 3-dimensional coordinate (3-axis)
  • With a hall effect IC
  • Protection IP65

Applications for 40JH

  • Various kinds of tooling machines
  • Robot operation
  • Security camera operation
  • 3-dimensional coordinate measuring apparatus


Controlling range of operating lever
X and Y directions: Approx. ±20º from center position
Z direction: Approx. ±30º from center position
Operating force
X and Y directions: Approx.1~4N (100~400gf) Z direction: Approx. 40~80mN•m (400~800gf.cm)
Operating temperature range: -20°C~+65°C
10~55Hz 98m/s²
Life expectancy
Approx. 5.000.000 operations for X and Y axes
Approx. 3.000.000 operations for Z axis
Approx. 110g
Hall effect IC type resistive element incorporated
Applied voltage: 5V±10%D.C.
Effective output: Approx. 0.5V~4.5V
Independent linearity tolerance: ±3%
Load resistance: Over 10KΩ
Dielectric strength
1 minute at 500VAC
Insulation resistance
Over 1000MΩ at 500VDC
EMS durability
100V/m (80Mhz~1GHz 1KHz sine-wave 80%AM modulation)
ESD durability
±8kV contact ±15kV aerial discharge (Based on IEC61000-4-2)
  • Volg ons: