13FLP Series Lineaire Potentiometer

Geleidend kunststof model met verlengde voor- en achteras

Key Features 13FLP

  • Miniature conductive plastic model
  • Measurement range: between 12 mm and 100 mm
  • Resistance value: between 500 Ω to 20 kΩ
  • Linearity tolerance: ±2%, ±1.5%, ±1%, ±0.7%, ±0.5% or ±0.3%
  • Various body dimensions available


Neem contact op voor een prijsaanvraag, een offerte of advies.

About the 13FLP Series Linear Potentiometer

The 13FLP is a low-cost item with side turret terminals and a thread at the end of the shaft.

In the 13FLPA series we have the 13FLP12A, 13FLP25A, 13FLP50A and 13FLP100A available.
For more specifications on one of these types, you can contact us.

Body dimensions (mm): 11x13x(depends on the type of linear potentiometer):

  • 13FLP12A: stroke 12 mm
  • 13FLP25A: stroke 25 mm
  • 13FLP50A: stroke 50 mm
  • 13FLP100A: stroke 100 mm

Special Specifications Available

Spring return device mounted on the shaft (friction is referred as within table), special machining on the shaft, wirewound resistive element type (13LP series). In case of 13FLP series with spring return device, please note the following: The spring return device is mounted on the outside shaft, of which dimensions are as the table.

  • Specificaties
  • Datasheet(s)
Standard resistance values
500Ω, 1k, 2kΩ, 5kΩ, 10kΩ, 20kΩ
Total resistance tolerance
Independent linearity tolerance
Standard class: ±2.0%, ±1.5%, ±1.0%, ±0.7%
Precision class: ±1.0%, ±0.7%, ±0.5%, ±0.3%
Essentially infinite
Output smoothness
Within 0.1% against input voltage
Contact resistance variation
Within 2% C.R.V.
Power rating
0.2W, 0.4W, 0.7W, 1.2W
Electrical stroke
12.7±0.5mm, 25.4±0.5mm, 50.8±0.5mm, 101.6±0.5mm
Insulation resistance
Over 1.000MΩ at 500VDC
Dielectric strength
1 minute at 500V.A.C.
Within 0.5N(50gf), Within 1.0N (100gf)
Stopper strength
Approx. 10g, approx. 15g, approx. 25g, approx. 35g


Neem contact op voor een prijsaanvraag, een offerte of advies.

Deel deze pagina:
  • Volg ons: