25HPS Multi-turn Potentiometer
Draadgewonden Potentiometer, Servomount type
Belangrijkste kenmerken
- Wirewound
- Dimensions (mm) DxL: 25×30.5 / 25×39
- Standard resistance range (ohm): 100Ω -50kΩ / 100Ω -100kΩ
- Independent linearity (±%): 0.3 to 0.2 / 0.2 to 0.1
- Mechanical travel (+10° 0°): 1,800 / 3,600
- Electrical travel (±5°): 1,800 / 3,600
About the 25HPS Multi-turn Potentiometer
The 25HPS is a servomount precision type multi-turn potentiometer with an outer diameter of 25mm. There are multi shaft and bushing dimensions available.
Features Multi-turn potentiometer 25HPS-5
- Wirewound
- Dimensions (mm) DxL: 25×30.5
- Standard resistance range (ohm): 100Ω -50kΩ
- Independent linearity (±%): 0.3 to 0.2
- Mechanical travel (+10° 0°): 1,800
- Electrical travel (±5°): 1,800
Features Multi-turn potentiometer 25HPS-10
- Wirewound
- Dimensions (mm) DxL: 25×39
- Standard resistance range (ohm): 100Ω -100kΩ
- Independent linearity (±%): 0.2 to 0.1
- Mechanical travel (+10° 0°): 3,600
- Electrical travel (±5°): 3,600
Special Specifications Available
Lower resistance (10Ω, 20Ω, 30Ω), 3turn type (S25HP3), 15turn type (S25HP15), 20turn
type (S25HP20), extra taps (available up 5 taps), multi-ganged (available up to 2 gangs), shaft with front and rear extension (rear shaft with 3mm dia. and 10mm length), shaft dia. (ø3.175mm, ø6.35mm) · bushing with inch dimensions, with a limit-switch adaptor, special machining on the shaft.
Do you need this sensor for your next project?
Request a quotation today or leave your details to recieve more information from one of our experts.
Have it your way
Not exactly what you’re looking for? We offer standard Linear Potentiometers, but can also help you with a tailor-made linear position sensor or a complete measuring solution. Please contact us for advice or budgetary pricing.
Praat met een expertTechnische specificaties
Specificaties | Waarde |
---|---|
(within 5kΩ): (±0.25%) (±0.15%) | |
Precision Class: ±0.2% ±0.1% | |
360º xn (+10º n: no. of turns) | Over 100 MΩ at 1,000 V.D.C. |
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 360º Xn ±5º (n: No. of turns) |
Independent linearity tolerance (5-turn 10-turn) | Standard Class: ±0.3% ±0.2% |
Mass | Approx. 50g (5-turn) Approx. 60g (10-turn) |
Max. practical resistance value | 100Ω (5turn), 200Ω (10turn) |
Max. working voltage | 900V |
Mechanical travel | 360º Xn (+10º n: No. of turns) |
Noise | Within 100Ω E.N.R. |
Power rating | 1.5W (5-turn), 2.0W (10-turn) |
Resist. temp. coefficient of wire | ±20p.p.m./ºC |
Shaft dia. (mm) | 4 |
Standard resistance range | 100Ω to 50kΩ (5turn), 100Ω to 100kΩ (10turn) |
Starting torque | Within 5mN·m (50gf·cm) (Servomount) |
Stopper strength | Approx. 0.9N·m (9kgf·cm) |
Total resistance tolerance | Standard Class ±3%(H), Precision Class ±1%(F) |