OF46HDS Oliegevulde Potentiometer
Draadgewonden Servomount Potentiometer 10-turn model
Belangrijkste kenmerken
- Dimensions (mm) DxL: 62×75
- Shaft Dia. (mm): 6
- Independent linearity (±%): 0.3 to 0.1
- Mechanical travel (+10° 0°): 3,600 +10° 0°
- Electrical travel (±5°): 3600°±5°
About the OF46HDS Oil-filled Potentiometer
The OF46HDS is a precision multi-turn type potentiometer with servomount and a body diameter of 62mm.
Bushingmount type:
- OF46HD-10 (10-turn)
Servomount type:
- OF46HDS-10 (10-turn)
Special specifications available
Multi ganged (available up to 2 gangs. Please note that mounting method is changed from bushing mount to screwmounting), with limit-switches, 3-turn and 5-turn type (these housing lengths are the same as that of 10-turn type: 75±2 mm), shaft dia. (ø 3.175mm) · bushing with inch dimensions, special machining on the shaft, shaft with front and rear extension (rear shaft with 6mm dia. and 28mm length).
Heeft u dit product nodig voor uw project?
Vraag uw offerte aan, of laat uw gegevens achter voor meer informatie van één van onze experts.
Volledig zoals u wilt
Niet precies wat u zoekt? Wij leveren standaard producten, maar kunnen u ook goed helpen met aangepaste producten, of een volledige tailor-made oplossing. Neem s.v.p. contact met ons op voor een advies op maat en een eventuele offerte.
Praat met een expertTechnische specificaties
Specificaties | Waarde |
---|---|
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 3,600º ±5º |
Independent linearity tolerance | Standard Class ±0.3%, Precision Class ±0.1% (±0.15% in case of on and within 5kΩ) |
Insulation resistance | Over 100MΩ at 1,000 V.D.C. |
Mass | Approx. 290g |
Max. practical resistance value | 200kΩ |
Max. working voltage | 900V |
Mechanical travel | 3,600º+10º 0º |
Noise | Within 100Ω E.N.R. |
Power rating | 5.0W |
Resist. temp. coefficient of wire | ±20p.p.m./ºC |
Standard resistance range | 100Ω to 100kΩ |
Starting torque | Within 30mN·m (300gf·cm) |
Stopper strength | Approx. 0.9N·m (9kgf·cm) |
Total resistance tolerance | Standard Class ±3% (H) (±5% (J) in case of within 1kΩ), Precision Class ±1% (K) |