MB Turns-counting Dials Analog Type Potentiometer
Draai-telling Dials Potentiometer met Analog-Readout
Belangrijkste kenmerken
- Read-out: Analog
- Outer dimensions (mm): 26
- Max. Number of turns-counting: 10
- Macthing shaft dia. (mm): 3, 3.175, 4, 6, 6.35
- Lock device: Yes
About the MB Turns-counting Dials Analog Type Potentiometer
The MB model has a window of read-out that is larger for easy reading.
Turns-counting dials Potentiometers are designed for use with Helicalohm Potentiometers and multi-turn potentiometers. They have a elegant appearance and rigid construction offering an easy reading, smooth rotation and accurate counting.
Special Specifications Available
Special colors on housing and spin plate on top of the knob (black, etc).
How to mount MB Series
In case of mounting Model MB Series counting dials on Helicalohm pot., the mounting adaptor of these counting dials and Helicalohm potentiometers are fixed on the panel according to the illustration given above.
The shaft of the Helicalohm Pot. is turned anticlockwise to its limit and is put into the mounting hole of the dial which was already set at "0". The shaft of the Helicalohm pot. is secured by the screw positioned on the knob of the dial. With this, the mounting is completed.
Mounting Adaptor for use with MB Series
The inner diameters of the mounting adapter is different to the diameters of the shaft of the potentiometers to be mounted and therefore, please use the mounting adaptor supplied with the dial itself. When mounting the dial on potentiometer, the 2-finger projections (*) of mounting adaptor are inserted in the receiving holes prepared on the base plate of dial firmly, by adjusting the gap between 2-finger projection (*) with a screw-driver.
There is a possibility that some irregular turns of dial may take place if the adjustment of this gap is insufficient.
Heeft u dit product nodig voor uw project?
Vraag uw offerte aan, of laat uw gegevens achter voor meer informatie van één van onze experts.
Product downloaden
Volledig zoals u wilt
Niet precies wat u zoekt? Wij leveren standaard producten, maar kunnen u ook goed helpen met aangepaste producten, of een volledige tailor-made oplossing. Neem s.v.p. contact met ons op voor een advies op maat en een eventuele offerte.
Praat met een expertTechnische specificaties
Specificaties | Waarde |
---|---|
Special: 3, 3.175, 6.35 | |
Combinable helicalohm pot. (matching shaft length of 25mm) | 10HP, 20HP, 12HHP, 12HP, 25HP, 20HHP, 12HPC, 46HD |
Lock device | YES |
Mass (approx. g) | 20 |
Matching shaft dia. (mm) | Standard: 4.6 |
Max. number of turns-counting | 10 |
Operating temp. range | - 30 ºC ~+ 60ºC |