18FLPC Series Lineaire Potentiometer
Conductive Plastic Model, shaft with a ball tip and fixing nail mounting to the body
Belangrijkste kenmerken
- Industrial conductive plastic model
- Measurement range: 25 mm and 50 mm
- Resistance value: 500 Ω to 10 kΩ
- Linearity tolerance: ±0.5%, ±0.2% and ±0.1%
- Body dimensions (mm): 18x18x63 or 18x18x68
About the 18FLPC Series Linear Potentiometer
The 18FLPC has a connector block on the housing case and a shaft with a spring return device and a ball tip at the end of shaft.
In the 18FLPC Series we have the 18FLPCC25RE and the 18FLPCC50RE.
Special Specifications available
Higher resistance value (20kΩ, 50kΩ [50kΩ is available for 18FLPCC50RE only] ), Stroke 75mm (S18FLPCC75), stroke 100mm (S18FLPCC100), stroke 150mm (S18FLPCC150), stroke 200mm (S18FLPCC200), sealed type (IP54, the length of "A" is extended by abt. 12mm), with spring return device (available 75mm & 100mm stroke, friction is approx. 3N [300gf]. Spring return device is mounted on the outer shaft), with a cardan joint (without spring return device). Extra taps (available up to 1 tap and only on the version with a connector). In case of leadwire terminals, the dimensions are as the right drawing: (the dimensions of "A", "B" & "L" are the same as above table), leadwire length is 1m.
Heeft u dit product nodig voor uw project?
Vraag een offerte aan, of laat uw gegevens achter voor meer informatie van één van onze experts.
Product downloaden
Volledig naar uw wens
Is dit niet precies wat u zoekt? Wij leveren standaard producten, maar kunnen u ook goed helpen met aangepaste producten, of een volledige tailor-made oplossing. Neem contact met ons op voor een advies op maat en een eventuele offerte.
Praat met een expertTechnische specificaties
| Specificaties | Waarde |
|---|---|
| Precision class | Precision class: ±0.2%, ±0.1% |
| Contact resistance variation | Within 2% C.R.V. |
| Dielectric strength | 1 minute at 500V.A.C. |
| Friction | Within 3N (300gf) |
| Independent linearity tolerance | Standard class: ±0.5% |
| Insulation resistance | Over 1.000MΩ at 500VDC |
| Mass | Approx. 100g, approx. 150g |
| Output smoothness | Within 0.1% against input voltage |
| Power rating | 0.5W, 0.75W |
| Resistance temperature coefficient | ± 400p.p.m./°C |
| Resolution | Essentially infinite |
| Standard resistance values | 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ |
| Stopper strength | Approx. 90N (9kgf) |
| Stroke | 25mm, 50mm |
| Total resistance tolerance | ±10% |
| With spring return device | Fitted (standard) |