20HP Multi-turn Potentiometer
Multi-turn Draadgewonden Bushound type
Belangrijkste kenmerken
- Wirewound
- Dimensions (mm) DxL: 20×18 / 20×25.5
- Resistance range (ohm): 100Ω -50kΩ / 100Ω -100kΩ
- Linearity (±%): 0.3 to 0.2 /0.2 to 0.1
- Mechanical travel (+10° 0°): 1,800 / 3600
- Electrical travel (±5°): 1,800 / 3600
About the 20HP Multi-turn Potentiometer
The 20HP is a precision multi-turn potentiometer with an outer diameter of 20mm. Servomount type and with limit-switch is also available.
Features Multi-turn potentiometer 20HP-5S
- Wirewound
- Dimensions (mm) DxL: 20×18
- Standard resistance range (ohm): 100Ω -50kΩ
- Independent linearity (±%): 0.3 to 0.2
- Mechanical travel (+10° 0°): 1,800
- Electrical travel (±5°): 1,800
Features Multi-turn potentiometer 20HP-10S
- Wirewound
- Dimensions (mm) DxL: 20×25.5
- Standard resistance range (ohm): 100Ω -100kΩ
- Independent linearity (±%): 0.2 to 0.1
- Mechanical travel (+10° 0°): 3600
- Electrical travel (±5°): 3600
Special Specifications Available
3turn type (S20HP3S), lower resistance values (10Ω, 20Ω, 50Ω), extra taps (available up to 1 tap), multiganged (available up to 2 gangs), shaft with front and rear extension (rear shaft with 2mm dia. and 10mm length), shaft dia. (ø6.35mm) · bushing with inch dimensions, special machining on the shaft, simple sealed housing (expect servomount type), slippingclutch incorporated type (S20HP10S1782, 20mN·m~60mN·m), with a limitswitch adaptor, with pin terminals for p.c. board (20HP-5P, 20HP-10P).
Heeft u dit product nodig voor uw project?
Vraag een offerte aan, of laat uw gegevens achter voor meer informatie van één van onze experts.
Product downloaden
Volledig naar uw wens
Is dit niet precies wat u zoekt? Wij leveren standaard producten, maar kunnen u ook goed helpen met aangepaste producten, of een volledige tailor-made oplossing. Neem contact met ons op voor een advies op maat en een eventuele offerte.
Praat met een expertTechnische specificaties
| Specificaties | Waarde |
|---|---|
| (within 5kΩ): (±0.25%) (±0.15%) | |
| Precision Class: ±0.2% ±0.1% | |
| Dielectric strength | 1 minute at 1,000 V.A.C. |
| Electrical travel | 360º Xn ±5º (n: No. of turns) |
| Independent linearity tolerance (5-turn 10-turn) | Standard Class: ±0.3% ±0.2% |
| Insulation resistance | Over 100 MΩ at 1,0000 V.D.C. |
| Mass | Approx. 25g (5-turn), Approx. 30g (10-turn) |
| Max. practical resistance value | 100kΩ (5turn), 150kΩ (10turn) |
| Max. working voltage | 900V |
| Mechanical travel | 360º Xn + 1 0 (n: No. of turns) |
| Noise | Within 100O E.N.R. |
| Power rating | 1.0W (5-turn) 2.0W (10-turn) |
| Resist. temp. coefficient of wire | ±20p.p.m./ºC |
| Shaft dia. (mm) | 6 |
| Standard resistance range | 100Ω to 50kΩ (5turn), 100Ω to 100kΩ (10turn) |
| Starting torque | Within 5mN·m (50gf·cm) (Bushingmount type), Within 3mN·m (30gf·cm) (Servomount type) |
| Stopper strength | Approx. 0.9N·m (9kgf·cm) (Bushingmount type), Approx. 0.6N·m (6kgf·cm) (Servomount type) |
| Total resistance tolerance | Standard Class ±3%(H), Precision Class ±1%(F) |