OF46HD Oliegevulde Potentiometer
Draadgewonden (Bushingmount) Potentiometer 10-turn model
Belangrijkste kenmerken
- Dimensions (mm) DxL: 62×75
- Shaft Dia. (mm): 6
- Independent linearity (±%): 0.3 to 0.1
- Mechanical travel (+10° 0°): 3,600 +10° 0°
- Electrical travel (±5°): 3600°±5°
About the OF46HD Oil-filled Potentiometer
The OF46HD is a precision multi-turn type potentiometer with bushingmount and a body diameter of 62mm.
Bushingmount type:
- OF46HD-10 (10-turn)
Servomount type:
- OF46HDS-10 (10-turn)
Special specifications available
Multi ganged (available up to 2 gangs. Please note that mounting method is changed from bushing mount to screwmounting), with limit-switches, 3-turn and 5-turn type (these housing lengths are the same as that of 10-turn type: 75±2 mm), shaft dia. (ø 3.175mm) · bushing with inch dimensions, special machining on the shaft, shaft with front and rear extension (rear shaft with 6mm dia. and 28mm length).
Heeft u dit product nodig voor uw project?
Vraag een offerte aan, of laat uw gegevens achter voor meer informatie van één van onze experts.
Product downloaden
Volledig naar uw wens
Is dit niet precies wat u zoekt? Wij leveren standaard producten, maar kunnen u ook goed helpen met aangepaste producten, of een volledige tailor-made oplossing. Neem contact met ons op voor een advies op maat en een eventuele offerte.
Praat met een expertTechnische specificaties
| Specificaties | Waarde |
|---|---|
| Dielectric strength | 1 minute at 1,000 V.A.C. |
| Electrical travel | 3,600º ±5º |
| Independent linearity tolerance | Standard Class ±0.3%, Precision Class ±0.1% (±0.15% in case of on and within 5kΩ) |
| Insulation resistance | Over 100MΩ at 1,000 V.D.C. |
| Mass | Approx. 290g |
| Max. practical resistance value | 200kΩ |
| Max. working voltage | 900V |
| Mechanical travel | 3,600º+10º 0º |
| Noise | Within 100Ω E.N.R. |
| Power rating | 5.0W |
| Resist. temp. coefficient of wire | ±20p.p.m./ºC |
| Standard resistance range | 100Ω to 100kΩ |
| Starting torque | Within 30mN·m (300gf·cm) |
| Stopper strength | Approx. 0.9N·m (9kgf·cm) |
| Total resistance tolerance | Standard Class ±3% (H) (±5% (J) in case of within 1kΩ), Precision Class ±1% (K) |