OFCP50 Oliegevulde Potentiometer
Draadgewonden (Servomount) Potentiometer voor R&D, industriële en maritieme toepassingen
Belangrijkste kenmerken
- Dimensions (mm) DxL: 70×52
- Shaft Dia. (mm): 6
- Independent linearity (±%): 0.5 to 0.1
- Mechanical travel (+10° 0°): 360°
- Electrical travel (±5°): 355°±3°
About the OFCP50 Oil-filled Potentiometer
The OFCP50 is a long-life type with servomount and ball bearings. It is suitable for precision servo use. (endless)
Special specifications available
Lower resistance values (50Ω to 500Ω), extra taps (available up to 3 taps), stopper (rotating angle becomes 330º and the stopper strength is 0.9N·M [9kgf·cm]), special electrical travel, shaft dia. (ø 6.35mm) with inch dimensions, special machining on the shaft, rear shaft (6mm dia. and 20mm length).
Heeft u dit product nodig voor uw project?
Vraag een offerte aan, of laat uw gegevens achter voor meer informatie van één van onze experts.
Product downloaden
Volledig naar uw wens
Is dit niet precies wat u zoekt? Wij leveren standaard producten, maar kunnen u ook goed helpen met aangepaste producten, of een volledige tailor-made oplossing. Neem contact met ons op voor een advies op maat en een eventuele offerte.
Praat met een expertTechnische specificaties
| Specificaties | Waarde |
|---|---|
| Dielectric strength | 1 minute at 1,000 V.A.C. |
| Electrical travel | 355º ±3º |
| Independent linearity tolerance | Standard Class ±0.5%, Precision Class ±0.1% |
| Insulation resistance | Over 100MΩ at 1,000 V.D.C. |
| Mass | Approx. 500g |
| Mechanical travel | 360º (Endless) |
| Noise | Within 100Ω E.N.R. |
| Power rating | 1.5W |
| Resist. temp. coefficient of wire | ±20p.p.m./ºC |
| Standard resistance range | 1kΩ to 50kΩ |
| Starting torque | Within 30mN·m (300gf·cm) |
| Total resistance tolerance | Standard Class ±3% (H), Precision Class ±1% (F) |