FCP22R Single-turn Potentiometer
Plastic Behuizing - Bushingmount - Low-cost Item
Belangrijkste kenmerken
- Conductive plastic
- Dimensions D x L (mm): 22x12
- Standard Resistance Range 1 Ω to 10 kΩ
- Independent Linearity (± %): 1.5 to 1.0
- Mechanical travel (+10° 0°): 360°
- Electrical travel (±5°): 340° ±5°
About the FCP22R Single-turn Potentiometer - Conductive plastic (Bushingmount)
The FCP22R is a low-cost potentiometer with a plastic housing, internationally patented snapping-in construction and rear-extended turret terminals.
Special Specifications Available
Extra taps (available up to 1 tap), special electrical travel, inch dimensional shaft dia. (ø6.35mm), bushing with inch dimensions, special machining on the shaft.
Heeft u dit product nodig voor uw project?
Vraag een offerte aan, of laat uw gegevens achter voor meer informatie van één van onze experts.
Product downloaden
Volledig naar uw wens
Is dit niet precies wat u zoekt? Wij leveren standaard producten, maar kunnen u ook goed helpen met aangepaste producten, of een volledige tailor-made oplossing. Neem contact met ons op voor een advies op maat en een eventuele offerte.
Praat met een expertTechnische specificaties
| Specificaties | Waarde |
|---|---|
| Contact resistance variation | Within 2% C.R.V. |
| Dielectric strength | 1 minute at 500 V.A.C. |
| Electrical travel | 340º ±5º |
| Independent linearity tolerance | Standard Class ±1.5%, Precision Class ±1.0% |
| Insulation resistance | Over 1,000MΩ at 500 V.D.C |
| Mass | Approx. 20g |
| Mechanical travel | 360º (Endless) |
| Output smoothness | Within 0.1% against input voltage |
| Power rating | 1.0.W |
| Resistance temp. coefficient | ±400p.p.m./ºC |
| Resolution | Essentially infinite |
| Shaft diameter (mm) | 6 |
| Special practical resistance values | 500, 20k, 50k, 100k (Ω) |
| Standard resistance values | 1k, 2k, 5k, 10 k (Ω) |
| Starting torque | Within 5mN·m (50gf·cm) |
| Total resistance tolerance | Standard Class ±15% (L), Precision Class ±10% (K) |