18FLPB Serier Linjär Potentiometer
Potentiometer med Konduktiv plastbana, axel med kulled och montagefläns på huset
Nyckelfunktioner
- Heavy duty wirewound model
- Measurement range: 50 mm
- Resistance value: 50 Ω to 100 kΩ
- Linearity tolerance: ±0.1% to ±0.5%
- Water-proof type
- 5 Poles
About the 18FLPB Series Linear Potentiometer
The 18FLPB has a connector block on the housing case and a shaft with a cardan joint.
The 18FLPB Series are available in stroke ranges varying from 25mm to 150mm.
For specfied information about a certain type, please contact us.
Special Specifications available
Stroke 200mm, sealed type (IP54, the length of "A" is extended by abt. 6 mm), extra tap, with leadwire terminals
Behöver du den här produkten för ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardprodukter, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
Specifikation | Värde |
---|---|
Precision class: ±0.2%, ±0.1%, ±0.05% | |
Dielectric strength | 1 minute at 500V.A.C. |
Friction | Within 1.2N (120gf) |
Independent linearity toerance | Standard class: ±0.5% |
Insulation resistance | Over 1.000MΩ at 500VDC |
Mass | Approx. 90g, approx. 120g, approx. 140g, approx. 160g, approx. 250g |
Power rating | 0.5W, 0.75W, 1.0W, 1.25W, 1.5W |
Resistance temperature coefficient | ±400p.p.m./°C |
Standard resistance values | 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ |
Stopper strength | Approx. 90N (9kgf) |
Stroke | 25mm, 50mm ,75mm, 100mm, 150mm |
Total resistance tolerance | ±10% |