Nyckelfunktioner

Hybrid
Dimensions (mm) DxL: 13x25.5
Resolution: Essentially infinite
Independent linearity (±%): 0.4 to 0.1
Mechanical travel (+10° 0°): 3,600 +15° 0°
Electrical travel (±5°): 3,600

About the 12HHPS Multi-turn Potentiometer

The 12HHPS is a small size, high resolution, long-life servomount potentiometer with an outer diameter of 13mm.

Bushingmount type

With lug terminals: 12HHP
With pin terminals for pc board: 12HHP-10P

Servomount type

12HHPS-10

Special Specifications Available

5-turn type (S12HHP-5), shaft with front and rear extension (rear shaft with 0.8mm dia. and 10mm length), special machining on the shaft, simple sealed housing (in case of servomount type, the housing length becomes longer by 1.5mm).

Behöver du den här produkten för ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardprodukter, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation	Värde
Contact resistance variation	Within 5% C.R.V.
Dielectric strength	1 minute at 1,000 V.A.C.
Electrical travel	3,600º ±5º
Independent linearity tolerance	Standard Class ±0.4%, Precision Class ±0.1% (±0.2% in case of within 5kΩ)
Insulation resistance	Over 1,000MΩ at 500V.D.C.
Mass	Approx. 109
Max. practical resistance value	100kΩ
Max. torque exerted on fastening the mounting nut to the bushing	Within 0.8mN·m (80kgf·cm)
Max. working voltage	450V
Mechanical travel	3,600º +15º
Output smoothness	Within 0.05% against input voltage
Power rating	1.0 W
Resistance temp. coefficient	±100p.p.m./ºC
Resolution	Essentially infinite
Shaft dia. (mm)	3
Standard resistance values	2k, 5k, 10k, 20k, 50k (Ω)
Starting torque	Within 3mN·m (30gf·cm) (Bushingmount type), Within 2mN·m (20gf·cm) (Servomount type)
Stopper strength	Approx. 0.15N·m (15kgf·cm)
Total resistance tolerance	Standard Class ±10%(K), Precision Class ±5%(J)