Nyckelfunktioner

Hybrid
Dimensions (mm) DxL: 22×19
Resolution: Essentially infinite
Independent linearity (±%): 0.25 to 0.1
Mechanical travel (+10° 0°): 3,600
Electrical travel (±5°): 3,600

About the 22HHP Multi-turn Potentiometer

The 22HHP is a low-cost, high resolution and long life bushingmount potentiometer with an outer diameter of 22mm.

Bushingmount type:

5-turn models: 22HHP-5, 22HHP-5M, 22HHP-5E, 22HHP-5N
10-turn models: 22HHP-10, 22HHP-10M, 22HHP-10E, 22HHP-10N

Servomount type:

5-turn models: 22HHPS-5
10-turn models: 22HHPS-10

Special Specifications Available

Shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), 3-turn type, multi-ganged (available up to 10-gangs), with high torque, special shaft dia. (ø3mm, ø3.175mm, ø4mm, ø5mm, ø6.35mm), special machining on the shaft, with plastic shaft, metal bushing type (22HHPM with anti-rotation pin), simple sealed housing, extra taps (available up to 1 tap only for 10turn), slippingclutch incorporated type (20mN·m~60mN·m).

Behöver du den här produkten för ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Produktnedladdningar

22hhp multi turn potentiometer en

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardprodukter, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation	Värde
	Precision Class: ±0.2% ±0.1%
Contact resistance variation	Within 5% C.R.V. (5-turn), Within 3% C.R.V. (10-turn)
Dielectric strength	1 minute at 1,000 V.A.C.
Electrical travel	360º X n ±5º (n: No. of turns)
Independent linearity tolerance (5-turn 10-turn)	Standard Class: ±0.35% ±0.25%
Insulation resistance	Over 100MΩ at 1,000V.D.C.
Mass	Approx. 20g (Bushingmount), Approx. 30g (Servomount) (both 5-turn and 10-turn)
Max. torque exerted on fastening the mounting nut to the bushing	Within 1.0N·m (10kgf·cm) (in case of panel thickness with over 2.5mm, the rotating torque may become heavier)
Max. working voltage	500V
Mechanical travel	360º X n (+10º n: No. of turns)
Output smoothness	Within 0.05% against input voltage (5-turn), Within 0.015% against input voltage (10-turn)
Power rating	1.0W (5-turn) 2.0W (10-turn)
Resistance temp. coefficient	±100p.p.m./ºC
Resolution	Essentially infinite
Shaft dia. (mm)	6
Standard resistance values	1k, 2k, 5k, 10k, 20k, 50k (Ω) (5turn). 2k, 5k, 10k, 20k, 50k, 100k (Ω) (10turn)
Starting torque	Within 5mN·m (50gf·cm)
Stopper strength	Approx. 0.9N·m (9kgf·cm)
Total resistance tolerance	Standard Class ±10%(K), Precision Class ±5%(J)