22HP Flervarvig Potentiometer
Trådlindad (Panelfäste)
Nyckelfunktioner
- Wirewound
- Dimensions (mm) DxL: 22×19
- Resistance range (ohm): 100Ω -50kΩ
- Linearity (±%): 0.3 to 0.2
- Mechanical travel (+10° 0°): 1,800
- Electrical travel (±5°): 1,800
About the 22HP Multi-turn Potentiometer
The 22HP is our lowest-cost multi-turn potentiometer with an outer diameter of 22mm. This potentiometer has an international patented snapping-in construction.
Features Multi-turn potentiometer 22HP-5
- Wirewound
- Dimensions (mm) DxL: 22×19
- Standard resistance range (ohm): 100Ω -50kΩ
- Independent linearity (±%): 0.3 to 0.2
- Mechanical travel (+10° 0°): 1,800
- Electrical travel (±5°): 1,800
Special Specifications Available
Shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), multi-ganged (available up to 10 gangs), with high torque, special shaft dia. (ø3mm, ø3.175mm, ø4mm, ø5mm), special machining on the shaft, with plastic shaft, metal bushing type (22HPM-n with anti-rotation pin), 1, 2, 3, 4, 6, 7 and 8-turn versions are available (these versions have the same outer dimensions, but general specifications are please request us for details), simple sealed housing, slippingclutch incorporated type (20mN·m~60mN·m), extra taps (available up to 1 tap only for 10-turn model), servomount type (same dimensions as 22HHPS-10).
Behöver du den här produkten för ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardprodukter, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| (within 5kΩ): (±0.25%) (±0.15%) | |
| Bushing: Glass-filled nylon (for ganged version the bushing is metalbrass without plating) | |
| Housing case: Glass-filled nylon | |
| Precision Class: ±0.2% ±0.1% | |
| Terminals: Gold-plated brass (all terminals can be Fitted with the AMP 110 series faston receptable (2.8x0.5mm) or equivalents | |
| Dielectric strength | 1 minute at 1,000 V.A.C. |
| Electrical travel | 360º Xn ±5º (n: No. of turns) |
| Independent linearity tolerance (5-turn 10-turn) | Standard Class: ±0.3% ±0.25% |
| Insulation resistance | Over 1,000MΩ at 500 V.D.C. |
| Mass | Approx. 20g (both 5-turn and 10-turn) |
| Materials | Shaft: Stainless steel |
| Max. torque exerted on fastening the mounting nut to the bushing | Within 1.0N·m (10kgf·cm) (in case of panel thickness with over 2.5mm, the rotating torque may become heavier) |
| Max. working voltage | 250V |
| Mechanical travel | 360º Xn (+10º n: No. of turns) |
| Noise | Within 100Ω E.N.R. |
| Power rating | 1.0W (5-turn), 2.0W (10-turn) |
| Resist. temp. coefficient of wire | ±20p.p.m./ºC |
| Shaft dia. (mm) | 6 |
| Standard resistance range | 100Ω to 50kΩ (5turn), 100Ω to 100kΩ (10turn) |
| Starting torque | Within 10mN·m (100gf ·cm) |
| Stopper strength | Approx. 0.35N·m (3.5kgf·cm) |
| Total resistance toleranc | Standard Class ±3%(H), Precision Class ±1%(F) |