Nyckelfunktioner

Wirewound
Dimensions (mm) DxL: 46×38.5
Standard resistance range (ohm): 10Ω -20kΩ / 20Ω -50kΩ
Independent linearity (±%): 0.4 to 0.2
Mechanical travel (+10° 0°): 1,080 / 1,800
Electrical travel (±5°): 1,080 / 1,800

About the 46HDS Multi-turn Potentiometer

The 46HDS is a servomount precision multi-turn potentiometer with an outer diameter of 46mm. This potentiometer has been manufactured over 50 years and is highly reliable. It is also available with limit-switches incorporated.

Features Multi-turn potentiometer 46HDS-3

Wirewound
Dimensions (mm) DxL: 46×38.5
Standard resistance range (ohm): 10-20k
Independent linearity (±%): 0.4 to 0.2
Mechanical travel (+10° 0°): 1,080
Electrical travel (±5°): 1,080

Features Multi-turn potentiometer 46HDS-5

Wirewound
Dimensions (mm) DxL: 46×38.5
Standard resistance range (ohm): 20-50k
Independent linearity (±%): 0.4 to 0.2
Mechanical travel (+10° 0°): 1,800
Electrical travel (±5°): 1,800

Behöver du den här produkten för ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardprodukter, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation	Värde
	(within 5kO): (±0.25%) (±0.15%)
	Precision Class: ±0.2% ±0.1%
Dielectric strength	1 minute at 1,000 V.A.C.
Electrical travel	360º Xn ±5º (n: No. of turns)
Independent linearity tolerance (5-turn 10-turn)	Standard Class: ±0.4% ±0.3%
Insulation resistance	Over 100 MΩ at 1,000 V.D.C.
Mass	Approx. 90g (3,5-turn), Approx. 120g (10-turn), Approx. 150g (15-turn), Approx. 180g (20-turn)
Max. practical resistance value	50kΩ, 100kΩ (3turn), 100kΩ (5turn), 200kΩ (10,15turn),500kΩ (20turn)
Max. working voltage	900V
Mechanical travel	360º Xn (+10º n: No. of turns)
Noise	Within 100Ω E.N.R.
Power rating	2.0W (3-turn) 2.5W (5-turn), 5.0W (10-turn), 7.5W (15-turn), 10.0W (20-turn)
Resist. temp. coefficient of wire	±20p.p.m./ºC
Shaft dia. (mm)	6
Standard resistance range	10Ω to 20kΩ (3turn), 20Ω to 50kΩ (5turn), 50Ω to 100kΩ (10,15turn), 50Ω to 200kΩ (20turn)
Starting torque	Within 20mN·m (200gf·cm) (Bushing mount type), Within 10mN·m (100gf·cm) (Servomount type)
Stopper strength	Approx. 0.9N·m (9kgf·cm)
Total resistance tolerance	Standard Class ±3%(H) [ ±5%(J) in case of within 1kΩ ], Precision Class ±1%(F) [ in the pot. with a single wire resistive element, the precision class should read ±2%(G) ]