Nyckelfunktioner

Dimensions (mm) DxL: 50.8×26
Element: conductive plastic
Function characteristics: 360°sin/cos
Conformity peak to peak (± %): 0.5 to 0.2
Mechanical travel: 360°
Electrical travel: 360°

About the FSCB50A Sinus Cosinus Potentiometer

The FSCB50A is a servomount type potentiometer with ball bearings and precision sine/cosine output. It is available in multiple diameters.

Standard Specifications Available

Multi-ganged (available up to 3 gangs. Housing length is extended by 16mm per 1 gang), shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), bushingmount type, shaft dia. (ø6.35mm) with inch dimensions, special machining on the shaft, oil-filled type.

Behöver du den här produkten för ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Produktnedladdningar

Fscb50a sinus cosinus potentiometer en

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardprodukter, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation	Värde
	Precision Class ±0.3%
	Precision Class ±10% (K)
	Super Precision Class ±0.2%
Conformity tolerance (peak-peak)	Standard Class ±0.5%
Contact resistance variation	Within 8% C.R.V.
Dielectric strength	1 minute at 1,000V.A.C.
Electrical travel	360º (Endless)
Insulation resistance	Over 1,000MΩ at 500 V.D.C.
Mass	Approx. 120g
Max. working voltage	250V
Mechanical travel	360º (Endless)
Output smoothness	Within 0.1% against input voltage
Power rating	1.25W
Resist. temp. coefficient	±400p.p.m./ºC
Resolution	Essentially infinite
Shaft dia. (mm)	6
Special higher practical resistance values	20k, 50k, 100K (Ω)
Standard resistance values	1k, 2k, 5k, 10k (Ω)
Starting torque	Within 5mN·m (50gf·cm)
Total resistance tolerance	Standard Class ±15% (L)