Nyckelfunktioner

Conductive plastic
Dimensions D x L (mm): 22x12
Standard Resistance Range 1 Ω to 10 kΩ
Independent Linearity (± %): 1.5 to 1.0
Mechanical travel (+10° 0°): 360°
Electrical travel (±5°): 320° ±5°

About the FCP22E Single-turn Potentiometer - Conductive plastic (Busingmount)

The FCP22E is a low-cost potentiometer with plastic housing, internationally patented snapping-in construction and side lug terminals.

Special Specifications Available

Extra taps (available up to 1 tap). Rear shaft (6mm dia. and 20mm length), Multi-ganged (available up to 10 gangs), Stopper (rotating angle becomes 320º and stopper strength is 0.6N·m [6kgf·cm]), Special electrical travel, Inch dimensional shaft dia. (ø6.35mm) · Bushing with inch dimensions, Special machining on the shaft.

Behöver du den här produkten för ditt nästa projekt?

Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.

Prata med en expert

Produktnedladdningar

Fcp22e single turn potentiometer en

Få det på ditt sätt

Inte exakt vad du letar efter? Vi erbjuder standardprodukter, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.

Prata med en expert

Tekniska specifikationer

Specifikation	Värde
Contact resistance variation	Within 2% C.R.V.
Dielectric strength	1 minute at 500 V.A.C.
Electrical travel	320º ±5º
Independent linearity tolerance	Standard Class ±1.5%, Precision Class ±1.0%
Insulation resistance	Over 1,000MΩ at 500 V.D.C
Mass	Approx. 20g
Mechanical travel	360º (Endless)
Output smoothness	Within 0.1% against input voltage
Power rating	1.0.W
Resistance temp. coefficient	±400p.p.m./ºC
Resolution	Essentially infinite
Shaft diameter (mm)	6
Special practical resistance values	500, 20k, 50k, 100k (Ω)
Standard resistance values	1k, 2k, 5k, 10k (Ω)
Starting torque	Within 5mN·m (50gf·cm)
Total resistance tolerance	Standard Class ±15% (L), Precision Class ±10% (K)