10HP Multi-turn Potentiometer
World's smallest 10-turn Potentiometer (5-turn and 10-turn)
Key Features 10HP
- Wirewound
- Dimensions (mm) DxL: 10.5×19.2 / 10.5×25.5
- Resistance range (ohm): 100Ω -20kΩ / 100Ω -50kΩ
- Linearity (±%): 0.35 to 0.2 / 0.25 to 0.1
- Mechanical travel (+10° 0°): 1,800 +30° 0° /
3,600 +30° 0° - Electrical travel (±5°): 1,800 / 3,600
About the 10HP Multi-turn Potentiometer
The Multi-turn Potentiometer 10HP is world's smallest 10-turn potentiometer. The potentiometer is available in 5-turn models and 10-turn models.
Features Multi-turn potentiometer 10HP-5
- Wirewound
- Dimensions (mm) DxL: 10.5×19.2
- Standard resistance range (ohm): 100 Ω - 20 kΩ
- Independent linearity (±%): 0.35 to 0.2
- Mechanical travel (+10° 0°): 1,800 +30° 0°
- Electrical travel (±5°): 1,800
Features Multi-turn potentiometer 10HP-10
- Wirewound
- Dimensions (mm) DxL: 10.5×25.5
- Standard resistance range (ohm): 100 Ω - 50 kΩ
- Independent linearity (±%): 0.25 to 0.1
- Mechanical travel (+10° 0°): 3,600 +30° 0°
- Electrical travel (±5°): 3,600
Special Specifications Available
3turn type (S10HP3), lower resistance values (20Ω, 50Ω), shaft dia. (ø3.175mm) · bushing with inch dimensions, special machining on the shaft, shaft with front and rear extension (rear shaft with 0.8mm dia. and 10mm length).
- Specifications
- Datasheets
Specifications
Shaft Dia. (mm)
4
Standard Resistance Range
100Ω to 20kΩ (5turn), 100Ω to 20kΩ (10turn)
Max. Practical Resistance Value
50kΩ (5turn), 100kΩ (10turn)
Total Resistance Tolerance
Standard Class ±3%(H), Precision Class ±1%(F)
Independent Linearity Tolerance (5-turn 10-turn)
Standard Class: ±0.35% ±0.25%
Precision Class: ±0.2% ±0.1%
(within 5kΩ): (±0.25%) (±0.15%)
Power Rating
0.5W (5-turn), 1.0W (10-turn)
Noise
Within 100O E.N.R.
Electrical Travel
360º Xn ±5º (n: No. of turns)
Mechanical Travel
360º Xn + 30º 0° (n: No. of turns)
Insulation Resistance
Over 100 MΩ at 500 V.D.C
Dielectric Strength
1 minute at 500 V.A.C.
Starting Torque
Within 3mN·m (30gf·cm)
Stopper Strength
Approx. 0.1N·m (1kgf·cm)
Max. Torque exerted on fastening the mounting nut to the bushing
Within 1N·m (10kgf·cm)
Max. Working Voltage
450 V
Resist. temp. Coefficient of Wire
±20p.p.m./ºC
Mass
Approx. 17g (5-turn), Approx. 20g (10-turn)
Datasheets
Downloads
Share this page by:
