22HHP Multi-turn Potentiometer
Hybrid Potentiometer (Bushingmount) 5-turn and 10-turn
Key Features 22HHP-10
- Hybrid
- Dimensions (mm) DxL: 22×19
- Resolution: Essentially infinite
- Independent linearity (±%): 0.25 to 0.1
- Mechanical travel (+10° 0°): 3,600
- Electrical travel (±5°): 3,600
About the 22HHP Multi-turn Potentiometer
The 22HHP is a low-cost, high resolution and long life bushingmount potentiometer with an outer diameter of 22mm.
Bushingmount type:
- 5-turn models: 22HHP-5, 22HHP-5M, 22HHP-5E, 22HHP-5N
- 10-turn models: 22HHP-10, 22HHP-10M, 22HHP-10E, 22HHP-10N
Servomount type:
- 5-turn models: 22HHPS-5
- 10-turn models: 22HHPS-10
Special Specifications Available
Shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), 3-turn type, multi-ganged (available up to 10-gangs), with high torque, special shaft dia. (ø3mm, ø3.175mm, ø4mm, ø5mm, ø6.35mm), special machining on the shaft, with plastic shaft, metal bushing type (22HHPM with anti-rotation pin), simple sealed housing, extra taps (available up to 1 tap only for 10turn), slippingclutch incorporated type (20mN·m~60mN·m).
- Specifications
- Datasheets
Specifications
Shaft Dia. (mm)
6
Standard resistance values
1k, 2k, 5k, 10k, 20k, 50k (Ω) (5turn). 2k, 5k, 10k, 20k, 50k, 100k (Ω) (10turn)
Total resistance tolerance
Standard Class ±10%(K), Precision Class ±5%(J)
Independent linearity tolerance (5-turn 10-turn)
Standard Class: ±0.35% ±0.25%
Precision Class: ±0.2% ±0.1%
Resolution
Essentially infinite
Output smoothness
Within 0.05% against input voltage (5-turn), Within 0.015% against input voltage (10-turn)
Contact resistance variation
Within 5% C.R.V. (5-turn), Within 3% C.R.V. (10-turn)
Power rating
1.0W (5-turn) 2.0W (10-turn)
Electrical travel
360º X n ±5º (n: No. of turns)
Mechanical travel
360º X n (+10º n: No. of turns)
Insulation resistance
Over 100MΩ at 1,000V.D.C.
Dielectric strength
1 minute at 1,000 V.A.C.
Starting torque
Within 5mN·m (50gf·cm)
Stopper strength
Approx. 0.9N·m (9kgf·cm)
Max. torque exerted on fastening the mounting nut to the bushing
Within 1.0N·m (10kgf·cm) (in case of panel thickness with over 2.5mm, the rotating torque may become heavier)
Max. working voltage
500V
Resistance temp. coefficient
±100p.p.m./ºC
Mass
Approx. 20g (Bushingmount), Approx. 30g (Servomount) (both 5-turn and 10-turn)
Datasheets
Downloads
Share this page by:
