FCP12AC Single-turn Potentiometer
Conductive plastic - Bushingmount
Key features
- Conductive plastic
- Dimensions D x L (mm): 13 x 10
- Standard Resistance Range 1 Ω to 10 kΩ
- Independent Linearity (± %): 2.0 to 1.0
- Mechanical travel (+10° 0°): 360°
- Electrical travel (±5°): 300° ±5°
About the FCP12AC Single-turn Potentiometer - Conductive plastic (Bushingmount)
The FCP12AC is a low-cost 1-turn potentiometer with rear extended pin terminals.
Special Specifications Available
Extra taps (available up to 1 tap), shaft with front and rear extension (rear shaft with 1mm dia. and 10mm length), with stopper (rotating angle becomes 310º and stopper strength is 0.3N·m [3kgf·cm]), special electrical travel, shaft dia. (ø3.175mm) bushing with inch dimensions, special machining on the shaft.
Do you need this sensor for your next project?
Request a quotation today or leave your details to recieve more information from one of our experts.
Product downloads
Have it your way
Not exactly what you’re looking for? We offer standard Linear Potentiometers, but can also help you with a tailor-made linear position sensor or a complete measuring solution. Please contact us for advice or budgetary pricing.
Talk to an expertTechnical Specifications
Specification | Value |
---|---|
Contact resistance variation | Within 3% C.R.V. |
Dielectric strength | 1 minute at 500 V.A.C. |
Electrical travel | 300º ±5º |
Independent linearity tolerance | Standard Class ±2.0% precision Class ±1.0% |
Insulation resistance | Over 1,000MΩ at 500 V.D.C |
Mass | Approx. 8g |
Mechanical travel | 360º (Endless) |
Output smoothness | Within 0.1% against input voltage |
Power rating | 0.2W |
Resistance temp. coefficient | ±400p.p.m./ºC |
Resolution | Essentially infinite |
Special practical resistance values | 500, 20k, 50k, 100k (Ω) |
Standard resistance values | 1k, 2k, 5k, 10 k (Ω) |
Starting torque | Within 2mN·m (20gf·cm) |
Starting torque | Within 2mN·m (20gf·cm) |
Total resistance tolerance | Standard Class ±15% (L) Precision Class ±10% (K) |