FCP22E Single-turn Potentiometer

Plastic Housing - Bushingmount - RoHS Compliant

FCP22E Single-turn Potentiometer | Althen Controls

About the FCP22E Single-turn Potentiometer

The FCP22E is a low-cost potentiometer with plastic housing, internationally patented snapping-in construction and side lug terminals.

Features FCP22E - Conductive plastic (Busingmount)

  • Conductive plastic
  • Dimensions D x L (mm): 22x12
  • Standard Resistance Range 1 to 10 kilo ohm
  • Independent Linearity (± %): 1.5 to 1.0
  • Mechanical travel (+10° 0°): 360°
  • Electrical travel (±5°): 320° ±5°

Special Specifications Available

Extra taps (available up to 1 tap). Rear shaft (6mm dia. and 20mm length), Multi-ganged (available up to 10 gangs), Stopper (rotating angle becomes 320º and stopper strength is 0.6N·m [6kgf·cm]), Special electrical travel, Inch dimensional shaft dia. (ø6.35mm) · Bushing with inch dimensions, Special machining on the shaft.


Shaft diameter (mm)
Standard Resistance Values
1k, 2k, 5k, 10k (O)
Special Practical resistance Values
500, 20k, 50k, 100k (O)
Total resistance tolerance
Standard Class ±15% (L), Precision Class ±10% (K)
Independent linearity tolerance
Standard Class ±1.5%, Precision Class ±1.0%
Essentially infinite
Output Smoothness
Within 0.1% against input voltage
Contact Resistance Variation
Within 2% C.R.V.
Power Rating
Electrical Travel
320º ±5º
Mechanical Travel
360º (Endless)
Insulation Resistance
Over 1,000MO at 500 V.D.C
Dielectric Strength
1 minute at 500 V.A.C.
Starting Torque
Within 5mN·m (50gf·cm)
Resistance temp. coefficient
Approx. 20g
  • Follow us: