CP22C Single-turn Potentiometer
1-Turn Potentiometer Metal Housing, Wirewound (Bushingmount)
Key features
- Wirewound
- Dimensions D x L (mm): 22x12
- Standard Resistance Range 50 Ω to 10 kΩ
- Independent Linearity (± %): 0.5 to 0.25
- Mechanical travel: 360°
- Electrical travel: 355° ±5°
About the CP22C Single-turn Potentiometer - Wirewound (Bushingmount)
The CP22C is a low-cost potentiometer with metal housing and rear extended lug terminals.
Special Specifications Available
Lower resistance values (10Ω, 20Ω), extra taps (available up to 1 taps), shaft with front and rear extension (rear shaft with 3mm dia. and 20mm length), with stopper (rotating angle becomes 320º and stopper strength is 0.9N·m [9kgf·cm]), special electrical travel, shaft dia. (ø6.35mm) with inch dimensions, special machining on the shaft.
Do you need this product for your next project?
Request a quotation today or leave your details to receive more information from one of our experts.
Product downloads
Have it your way
Not exactly what you’re looking for? We offer standard products, but can also help you with a tailor-made or fully customized solution. Please contact us for advice or budgetary pricing.
Talk to an expertTechnical Specifications
Specification | Value |
---|---|
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 355º ±5º |
Independent linearity tolerance | Standard Class ±0.5% Precision Class ±0.25% (±0.35% in case of within 1kO) |
Insulation resistance | Over 1,000MΩ at 1,000 V.D.C |
Mass | Approx. 30g |
Max. practical resistance value | 20kΩ |
Mechanical travel | 360º (Endless) |
Noise | Within 100Ω E.N.R. |
Power rating | 0.5W |
Resist. temp. coefficient of wire | ±20p.p.m./ºC |
Shaft diameter (mm) | 6 |
Standard resistance range | 50Ω to 10kΩ |
Starting torque | Within 5mN·m (50gf·cm) |
Total resistance tolerance | Standard Class ±3%(H) Precision Class ±1%(F) |