CP22E Single-turn Potentiometer

1-Turn Potentiometer, Plastic Housing, Wirewound (Bushingmount)

CP22E Single-turn Potentiometer | Althen Controls

About the CP22E Single-turn Potentiometer

The CP22E is a low-cost potentiometer with plastic housing and an internationally patented snapping-in construction and side lug terminals.

Features CP22E - Wirewound (Bushingmount)

  • Wirewound
  • Dimensions D x L (mm): 22x12
  • Standard Resistance Range 50 to 10 kilo ohm
  • Independent Linearity (± %): 0.5 to 0.25
  • Mechanical travel: 360°
  • Electrical travel: 355° ±5°

Special Specifications Available

Lower resistance values (10O, 20O), extra taps (available up to 1 tap), shaft with front and rear extension (rear shaft with 6mm dia. and 20mm length), multi-ganged (available up to 10 gangs), with stopper (rotating angle becomes 320º and stopper strength is 0.6N·m [6kgf·cm]), special electrical travel, shaft dia. (ø6.35mm) bushing with inch dimensions, special machining on the shaft.


Shaft diameter (mm)
Standard resistance range
50O to 10kO
Max. Practical resistance value
Total resistance tolerance
Standard Class ±3%(H) Precision Class ±1%(F)
Independent linearity tolerance
Standard Class ±0.5% Precision Class ±0.25% (±0.35% in case of within 1kO)
Power Rating
Within 100O E.N.R.
Electrical Travel
355º ±5º
Mechanical Travel
360º (Endless)
Insulation Resistance
Over 1,000MO at 1,000 V.D.C
Dielectric Strength
1 minute at 1,000 V.A.C.
Starting Torque
Within 5mN·m (50gf·cm)
Resist. temp. coefficient of wire
Approx. 20g
  • Follow us: