FCP50A Single-turn Potentiometer
1-turn Potentiometer | Conductive plastic (Servomount)
Eigenschaften
- Conductive plastic
- Dimensions D x L (mm): 50.8 x 18
- Standard Resistance Range 1 Ω to 10 kΩ
- Independent Linearity (± %): 0.5 to 0.05
- Mechanical travel (+10° 0°): 360°
- Electrical travel (±5°): 350° ±5°
About the FCP50A Single-turn Potentiometer - Conductive plastic (Servomount)
The FCP50A is a servomount type potentiometer with ball bearings, a 51mm outer diameter and turret side terminals.
Special Specifications Available
Extra taps (available up to 3 taps), multi-ganged (available up to 7 gangs, housing length is extended by 12mm per 1 gang), shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), with stopper (rotating angle becomes 320º and stopper strength is 0.9N·m [9kgf·cm]), special electrical travel, shaft dia. (ø6.35mm) with inch dimensions, special machining on the shaft.
Benötigen Sie diesen Sensor für Ihr nächstes Projekt?
Fordern Sie jetzt ein Angebot an oder lassen Sie sich kostenfrei von unseren Experten beraten!
Produkt Downloads
Maßgeschneidert nach Ihren Anforderungen
Nicht das richtige Produkt? Wir bieten Ihnen sowohl Standard Sensoren als auch maßgeschneiderte Produkte und komplette Messlösungen. Bitte kontaktieren Sie uns für eine Beratung oder ein unverbindliches Angebot!
KontaktTechnische Spezifikationen
Spezifikationen | Wert |
---|---|
Contact resistance variation | Within 2% C.R.V. |
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 350º ±5º |
Independent linearity tolerance | Standard Class ±0.5%, Precision Class ±0.2%, Super precision Class ±0.05% |
Insulation resistance | Over 1,000MΩ at 1,000 V.D.C |
Mass | Approx. 80g |
Mechanical travel | 360º (Endless) |
Output smoothness | Within 0.1% against input voltage |
Power rating | 3.0W |
Resistance temp. coefficient | ±400p.p.m./ºC |
Resolution | Essentially infinit |
Shaft diameter (mm) | 6 |
Special practical resistance values | 500, 20k, 50k, 100k, 200k, 500k (Ω) |
Standard resistance values | 1k, 2k, 5k, 10k (Ω) |
Starting torque | Within 4mN·m (40gf·cm) |
Total resistance tolerance | Standard Class ±10% (K) |