FCP50A Single-turn Potentiometer
1-turn Potentiometer | Conductive plastic (Servomount)
Caractéristiques principales
- Conductive plastic
- Dimensions D x L (mm): 50.8 x 18
- Standard Resistance Range 1 Ω to 10 kΩ
- Independent Linearity (± %): 0.5 to 0.05
- Mechanical travel (+10° 0°): 360°
- Electrical travel (±5°): 350° ±5°
About the FCP50A Single-turn Potentiometer - Conductive plastic (Servomount)
The FCP50A is a servomount type potentiometer with ball bearings, a 51mm outer diameter and turret side terminals.
Special Specifications Available
Extra taps (available up to 3 taps), multi-ganged (available up to 7 gangs, housing length is extended by 12mm per 1 gang), shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), with stopper (rotating angle becomes 320º and stopper strength is 0.9N·m [9kgf·cm]), special electrical travel, shaft dia. (ø6.35mm) with inch dimensions, special machining on the shaft.
Avez-vous besoin de ce produit pour votre prochain projet ?
Demandez un devis ou laissez vos coordonnées pour recevoir plus d'informations de la part d'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des produits standard, mais nous pouvons également vous aider à trouver une solution complète sur mesure. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Contact resistance variation | Within 2% C.R.V. |
Dielectric strength | 1 minute at 1,000 V.A.C. |
Electrical travel | 350º ±5º |
Independent linearity tolerance | Standard Class ±0.5%, Precision Class ±0.2%, Super precision Class ±0.05% |
Insulation resistance | Over 1,000MΩ at 1,000 V.D.C |
Mass | Approx. 80g |
Mechanical travel | 360º (Endless) |
Output smoothness | Within 0.1% against input voltage |
Power rating | 3.0W |
Resistance temp. coefficient | ±400p.p.m./ºC |
Resolution | Essentially infinit |
Shaft diameter (mm) | 6 |
Special practical resistance values | 500, 20k, 50k, 100k, 200k, 500k (Ω) |
Standard resistance values | 1k, 2k, 5k, 10k (Ω) |
Starting torque | Within 4mN·m (40gf·cm) |
Total resistance tolerance | Standard Class ±10% (K) |