18FLPC Series Linear Potentiometer

---

Eigenschaften

• Industrial conductive plastic model
• Measurement range: 25 mm and 50 mm
• Resistance value: 500 Ω to 10 kΩ
• Linearity tolerance: ±0.5%, ±0.2% and ±0.1%
• Body dimensions (mm): 18x18x63 or 18x18x68

---

About the 18FLPC Series Linear Potentiometer

The 18FLPC has a connector block on the housing case and a shaft with a spring return device and a ball tip at the end of shaft.

In the 18FLPC Series we have the 18FLPCC25RE and the 18FLPCC50RE.

Special Specifications available

Higher resistance value (20kΩ, 50kΩ [50kΩ is available for 18FLPCC50RE only] ), Stroke 75mm (S18FLPCC75), stroke 100mm (S18FLPCC100), stroke 150mm (S18FLPCC150), stroke 200mm (S18FLPCC200), sealed type (IP54, the length of "A" is extended by abt. 12mm), with spring return device (available 75mm & 100mm stroke, friction is approx. 3N [300gf]. Spring return device is mounted on the outer shaft), with a cardan joint (without spring return device). Extra taps (available up to 1 tap and only on the version with a connector). In case of leadwire terminals, the dimensions are as the right drawing: (the dimensions of "A", "B" & "L" are the same as above table), leadwire length is 1m.

---