18FLPC Serier Linjär Potentiometer
Potentiometer med konduktiv plasbana, axel med kulled och montagefläns på kroppen
Nyckelfunktioner
- Industrial conductive plastic model
- Measurement range: 25 mm and 50 mm
- Resistance value: 500 Ω to 10 kΩ
- Linearity tolerance: ±0.5%, ±0.2% and ±0.1%
- Body dimensions (mm): 18x18x63 or 18x18x68
About the 18FLPC Series Linear Potentiometer
The 18FLPC has a connector block on the housing case and a shaft with a spring return device and a ball tip at the end of shaft.
In the 18FLPC Series we have the 18FLPCC25RE and the 18FLPCC50RE.
Special Specifications available
Higher resistance value (20kΩ, 50kΩ [50kΩ is available for 18FLPCC50RE only] ), Stroke 75mm (S18FLPCC75), stroke 100mm (S18FLPCC100), stroke 150mm (S18FLPCC150), stroke 200mm (S18FLPCC200), sealed type (IP54, the length of "A" is extended by abt. 12mm), with spring return device (available 75mm & 100mm stroke, friction is approx. 3N [300gf]. Spring return device is mounted on the outer shaft), with a cardan joint (without spring return device). Extra taps (available up to 1 tap and only on the version with a connector). In case of leadwire terminals, the dimensions are as the right drawing: (the dimensions of "A", "B" & "L" are the same as above table), leadwire length is 1m.
Behöver du den här produkten för ditt nästa projekt?
Begär en offert eller lämna dina uppgifter för att få mer information från en av våra experter.
Produktnedladdningar
Få det på ditt sätt
Inte exakt vad du letar efter? Vi erbjuder standardprodukter, men kan också hjälpa dig med en komplett skräddarsydd lösning. Kontakta oss för rådgivning eller budgetprissättning.
Prata med en expertTekniska specifikationer
| Specifikation | Värde |
|---|---|
| Precision class: ±0.2%, ±0.1% | |
| Contact resistance variation | Within 2% C.R.V. |
| Dielectric strength | 1 minute at 500V.A.C. |
| Friction | Within 3N (300gf) |
| Independent linearity tolerance | Standard class: ±0.5% |
| Insulation resistance | Over 1.000MΩ at 500VDC |
| Mass | Approx. 100g, approx. 150g |
| Output smoothness | Within 0.1% against input voltage |
| Power rating | 0.5W, 0.75W |
| Resistance temperature coefficient | ± 400p.p.m./°C |
| Resolution | Essentially infinite |
| Standard resistance values | 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ |
| Stopper strength | Approx. 90N (9kgf) |
| Stroke | 25mm, 50mm |
| Total resistance tolerance | ±10% |
| With spring return device | Fitted (standard) |