18FLPB Series Linear Potentiometer
Conductive Plastic Model, shaft with a cardan joint and fixing nail mounting to the body
Caractéristiques principales
- Heavy duty wirewound model
- Measurement range: 50 mm
- Resistance value: 50 Ω to 100 kΩ
- Linearity tolerance: ±0.1% to ±0.5%
- Water-proof type
- 5 Poles
About the 18FLPB Series Linear Potentiometer
The 18FLPB has a connector block on the housing case and a shaft with a cardan joint.
The 18FLPB Series are available in stroke ranges varying from 25mm to 150mm.
For specfied information about a certain type, please contact us.
Special Specifications available
Stroke 200mm, sealed type (IP54, the length of "A" is extended by abt. 6 mm), extra tap, with leadwire terminals
Avez-vous besoin de ce produit pour votre prochain projet ?
Demandez un devis ou laissez vos coordonnées pour recevoir plus d'informations de la part d'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des produits standard, mais nous pouvons également vous aider à trouver une solution complète sur mesure. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Precision class: ±0.2%, ±0.1%, ±0.05% | |
Dielectric strength | 1 minute at 500V.A.C. |
Friction | Within 1.2N (120gf) |
Independent linearity toerance | Standard class: ±0.5% |
Insulation resistance | Over 1.000MΩ at 500VDC |
Mass | Approx. 90g, approx. 120g, approx. 140g, approx. 160g, approx. 250g |
Power rating | 0.5W, 0.75W, 1.0W, 1.25W, 1.5W |
Resistance temperature coefficient | ±400p.p.m./°C |
Standard resistance values | 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ |
Stopper strength | Approx. 90N (9kgf) |
Stroke | 25mm, 50mm ,75mm, 100mm, 150mm |
Total resistance tolerance | ±10% |