FCP22E Single-turn Potentiometer
Plastic Housing - Bushingmount - RoHS Compliant
Caractéristiques principales
- Conductive plastic
- Dimensions D x L (mm): 22x12
- Standard Resistance Range 1 Ω to 10 kΩ
- Independent Linearity (± %): 1.5 to 1.0
- Mechanical travel (+10° 0°): 360°
- Electrical travel (±5°): 320° ±5°
About the FCP22E Single-turn Potentiometer - Conductive plastic (Busingmount)
The FCP22E is a low-cost potentiometer with plastic housing, internationally patented snapping-in construction and side lug terminals.
Special Specifications Available
Extra taps (available up to 1 tap). Rear shaft (6mm dia. and 20mm length), Multi-ganged (available up to 10 gangs), Stopper (rotating angle becomes 320º and stopper strength is 0.6N·m [6kgf·cm]), Special electrical travel, Inch dimensional shaft dia. (ø6.35mm) · Bushing with inch dimensions, Special machining on the shaft.
Avez-vous besoin de ce produit pour votre prochain projet ?
Demandez un devis ou laissez vos coordonnées pour recevoir plus d'informations de la part d'un de nos experts.
Téléchargements de produits
Faites-le à votre façon
Vous ne trouvez pas exactement ce que vous cherchez ? Nous proposons des produits standard, mais nous pouvons également vous aider à trouver une solution complète sur mesure. N'hésitez pas à nous contacter pour obtenir des conseils ou un devis.
Parler à un expertSpécifications techniques
Spécifications | Valeur |
---|---|
Contact resistance variation | Within 2% C.R.V. |
Dielectric strength | 1 minute at 500 V.A.C. |
Electrical travel | 320º ±5º |
Independent linearity tolerance | Standard Class ±1.5%, Precision Class ±1.0% |
Insulation resistance | Over 1,000MΩ at 500 V.D.C |
Mass | Approx. 20g |
Mechanical travel | 360º (Endless) |
Output smoothness | Within 0.1% against input voltage |
Power rating | 1.0.W |
Resistance temp. coefficient | ±400p.p.m./ºC |
Resolution | Essentially infinite |
Shaft diameter (mm) | 6 |
Special practical resistance values | 500, 20k, 50k, 100k (Ω) |
Standard resistance values | 1k, 2k, 5k, 10k (Ω) |
Starting torque | Within 5mN·m (50gf·cm) |
Total resistance tolerance | Standard Class ±15% (L), Precision Class ±10% (K) |