15FLP Series Linear Potentiometer
Conductive Plastic Model with front and rear extended shaft
Key features
- Measurement range: between 15 mm and 30 mm
- Resistance value: between 500 Ω to 10 kΩ
- Linearity tolerance: ±2%, ±1% or ±0.5%
- Body dimensions (mm): 15x24x(depends on the type of linear potentiometer)
About the 15FLP Series Linear Potentiometer
The 15FLP is a low-cost item with a thread at the end of shaft and short stroke from 10mm to 30mm.
In the Linear potentiometer 15FLPA series we have the following types available:, 15FLP10A, 15FLP15A, 15FLP20A and 15FLP30A.
For type specific details, please contact us.
Special Specifications Available
Spring return device incorporated (friction is approx. 3N [300gf], special machining on the shaft.
Do you need this product for your next project?
Request a quotation today or leave your details to receive more information from one of our experts.
Product downloads
Have it your way
Not exactly what you’re looking for? We offer standard products, but can also help you with a tailor-made or fully customized solution. Please contact us for advice or budgetary pricing.
Talk to an expertTechnical Specifications
| Specification | Value |
|---|---|
| Precision class: ±1.0%, ±0.5% | |
| Contact resistance variation | Within 2% C.R.V. |
| Dielectric strength | 1 minute at 1.000V.A.C. |
| Friction | Within 0.3N(30gf) |
| Independent linearity tolerance | Standard class: ±2.0%, ±1.0% |
| Insulation resistance | Over 1.000MΩ at 500VDC |
| Mass | Approx. 30g |
| Output smoothness | Within 0.1% against input voltage |
| Power rating | 0.2W, 0.3W, 0.4W, 0.5W |
| Resistance temperature coefficient | ±400p.p.m./°C |
| Resolution | Essentially infinite |
| Standard resistance values | 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ |
| Stopper strength | Approx. 20N (2kgf) |
| Stroke | 10mm, 15mm, 20mm, 30mm |
| Total resistance tolerance | ±10% |