10HP Multi-turn Potentiometer

World's smallest 10-turn Potentiometer (5-turn and 10-turn)

10HP Multi-turn Potentiometer | Althen Controls

About the 10HP Multi-turn Potentiometer

The Multi-turn Potentiometer 10HP is world's smallest 10-turn potentiometer. The potentiometer is available in 5-turn models and 10-turn models.

Features Multi-turn potentiometer 10HP-5

  • Wirewound
  • Dimensions (mm) DxL: 10.5×19.2
  • Standard resistance range (ohm): 100-20k
  • Independent linearity (±%): 0.35 to 0.2
  • Mechanical travel (+10° 0°): 1,800 +30° 0°
  • Electrical travel (±5°): 1,800

Features Multi-turn potentiometer 10HP-10

  • Wirewound
  • Dimensions (mm) DxL: 10.5×25.5
  • Standard resistance range (ohm): 100-50k
  • Independent linearity (±%): 0.25 to 0.1
  • Mechanical travel (+10° 0°): 3,600 +30° 0°
  • Electrical travel (±5°): 3,600

Special Specifications Available

3turn type (S10HP3), lower resistance values (20O, 50O), shaft dia. (ø3.175mm) · bushing with inch dimensions, special machining on the shaft, shaft with front and rear extension (rear shaft with 0.8mm dia. and 10mm length).


Shaft Dia. (mm)
Standard Resistance Range
100O to 20kO (5turn), 100O to 20kO (10turn)
Max. Practical Resistance Value
50kO (5turn), 100kO (10turn)
Total Resistance Tolerance
Standard Class ±3%(H), Precision Class ±1%(F)
Independent Linearity Tolerance (5-turn 10-turn)
Standard Class: ±0.35% ±0.25%
Precision Class: ±0.2% ±0.1%
(within 5kO): (±0.25%) (±0.15%)
Power Rating
0.5W (5-turn), 1.0W (10-turn)
Within 100O E.N.R.
Electrical Travel
360º Xn ±5º (n: No. of turns)
Mechanical Travel
360º Xn + 30º 0° (n: No. of turns)
Insulation Resistance
Over 100 MO at 500 V.D.C
Dielectric Strength
1 minute at 500 V.A.C.
Starting Torque
Within 3mN·m (30gf·cm)
Stopper Strength
Approx. 0.1N·m (1kgf·cm)
Max. Torque exerted on fastening the mounting nut to the bushing
Within 1N·m (10kgf·cm)
Max. Working Voltage
450 V
Resist. temp. Coefficient of Wire
Approx. 17g (5-turn), Approx. 20g (10-turn)
  • Volg ons: